Reply #3: Should not be a problem to continue running with the 10GB [View All]

[Zorro]

But I'd suggest pulling the bad drive out and replacing it with a new one.

Replacing a disk is pretty simple. There are 2 connectors: one is for power, and the other one is for the data signals. Grip them by the end of the connectors and tug; they are probably in pretty snugly, so don't give up if they don't immediately pop out.

The new disk will need to be configured as the master. Look at the jumper configuration description, and insert the jumper to connect the two pins to make the new disk the master. Then plug in the power and data signal connectors, screw the disk down, and you're ready to go. When you boot up OSX I think it may ask you if you want to format your new disk.

The G4 400MHz is a great machine. I've had a 350MHz for almost 5 years, and there really isn't much stuff out there that would compel me to buy a new G5 (although I really find the new iMacs appealing).