Very Technical Networking Question that I can't seem to get answered

[WLKjr]

I need to find out the principle feature that RMON1 standard added to the MIB-2 standard.

[Prisoner_Number_Six]

1. First one at the top of Google

http://www.javvin.com/protocolRMON.html

There are 2 versions of RMON: RMON1 (RMONv1)and RMON2 (RMONv2). RMON1 defined 10 MIB groups for basic network monitoring, which can now be found on most modern network hardware. RMON2 (RMONv2) is an extension of RMON that focuses on higher layers of traffic above the medium access-control (MAC) layer. RMON2 has an emphasis on IP traffic and application-level traffic. RMON2 allows network management applications to monitor packets on all network layers. This is difference from RMON which only allows network monitoring at MAC layer or below.

-snip-

There are endless references- just start at the top and read until you find what you need.

[WLKjr]

2. Thanks

I didn't see that link when I did a search, maybe I should have looked a little harder. Thanks again!