Saw through trumps Impenetrable Wall for just $33 bucks on Amazon

[tomhagen]

https://www.washingtonpost.com/national/smugglers-are-sawing-through-new-sections-of-trumps-border-wall/2019/11/01/25bf8ce0-fa72-11e9-ac8c-8eced29ca6ef_story.html

SAN DIEGO — Smuggling gangs in Mexico have repeatedly sawed through new sections of President Trump’s border wall in recent months by using commercially available power tools, opening gaps large enough for people and drug loads to pass through, according to U.S. agents and officials with knowledge of the damage.
The breaches have been made using a popular cordless household tool known as a reciprocating saw that retails at hardware stores for as little as $100. When fitted with specialized blades, the saws can slice through one of the barrier’s steel-and-concrete bollards in a matter of minutes, according to the agents, who spoke on the condition of anonymity because they were not authorized to speak publicly about the barrier-defeating techniques.
After cutting through the base of a single bollard, smugglers can push the steel out of the way, allowing an adult to fit through the gap. Because the bollards are so tall — and are attached only to a panel at the very top — their length makes them easier to push aside once they have been cut and are left dangling, according to engineers consulted by The Washington Post



BLACK+DECKER 20V MAX Reciprocating Saw, Tool Only (BDCR20B) https://www.amazon.com/dp/B00IP27DFA/ref=cm_sw_r_cp_tai_zBzVDbZKG2B4C

Or

Milwaukee M18 2630-20 18 Volt Lithium Ion 6-1/2" 3,500 RPM Cordless Circular Saw w/ Magnesium Guards and Included 24-Tooth Carbide Wood Cutting Blade https://www.amazon.com/dp/B001FA14N6/ref=cm_sw_r_cp_tai_xHzVDbJZA8DNE

[NoMoreRepugs]

1. Alligator and snake filled moats coming soon?

[SWBTATTReg]

2. The idiot wall fails miserably at doing literally anything. What an irresponsible waste of money...

Congress needs to seize that money back by cutting the WH and Executive branch budgets.

[dameatball]

3. I still have one that I used to cut rebar. As long as you have fresh blades the saw works well.

Very effective and completely portable.

[MineralMan]

4. To cut the steel and concrete, you need a specialty blade

with carbide teeth. They cost about $30 and will handle almost any metal and the concrete's not a big problem, either. You'll want to bring a spare, in case you break one. Here's a good one:

https://www.amazon.com/Freud-DS0908CF-Carbide-tipped-Reciprocating-Blades/dp/B00NOBAX6S/ref=sr_1_3?keywords=steel+and+concrete+reciprocating+saw+blade&qid=1572893053&s=hi&sr=1-3